|

|
Deep Water Smallmouth
Bass (Part 2)
This is part II of an article written by
guide and professional bass
angler Mark Currie gives his tips how to catch large smallmouth bass that
reside in the deeper parts of lakes. Mark likes to take his
guests fishing on a number of bodies of water in New York State, Vermont,
and Quebec, including Lake Champlain, Lake Memphremagog, Lake St-Louis,
Lake of Two Mountains, Lake St. Francis, and the Ottawa and St. Lawrence
Rivers.
Mark's personal website can be found at http://pages.infinit.net/mjcbass |
Mike
here - Before I let Mark take it away, I will take the opportunity to
remind you what was going on in Part I of Deep
Water Smallmouth Bass. When Mark finds his underwater
structure, he likes to search for aggressive bass by tossing top water
baits like Pop-R's, followed up with medium depth-diving crank baits
like Berkley Frenzys. After releasing the aggressive fish he
settles in with a slower presentation of various jigs with
plastics...take it away Mark...   |
|
Now that you have determined
the whereabouts of the bass that were aggressive enough to bite, you
will cover the remainder of the water that you marked earlier. For this
presentation I strongly recommend the use of Fireline. This Micro Dinema
line manufactured by Berkley has the feel and sensitivity of no other
line on the market, and will enable you to detect the smallest pebbles
while dragging the bottom of the lake that you are fishing. Fairly short
rods of about five to six feet, medium action, six to fifteen pound
rated, matched with reels balanced for the same rating and loaded with
ten to fourteen pound test Fireline, are the perfect combinations for
this method of fishing. As for what to tie at the end of the line, I
recommend the use of either tube jigs or spider grubs. These plastic
imitations are so realistic that even the finickiest of bass can’t
resist when presented properly.
Beginning with the tubes,
rigging can either be done on the inside or the outside of the soft
plastic bait. My preference is to insert a tube jig of between 1/8 ounce
and 3/8 ounce inside of the tube and pop the hook eye out by applying
pressure over the top.   |

Mark catches smallmouth
bass like these at will
|
With the abundance of
tubes on the market these days, it’s a personal preference when it
comes to makes, styles and colors. Berkley ranks amongst the top three
with their Power Bait scent formula impregnated within the plastic.
Other companies are now adding salt to their formulas to allow extra
retention time once the fish grabs hold to create additional hookups.
Tie the jig directly to the Fireline with a Palomar Knot, as this seems
to be the preferred knot for non-slippage, when it comes to any braided
lines. Wind and depth will determine the size of the jig head that you
will want to choose. Keeping contact with the bottom at all times is
crucial while using this method, so you want to adjust as needed.
  |
Anyone who has fished “Lindy Rigs”
before will have a better understanding of this presentation, but for
those who have not, this technique is very simple. Keep your rod tip
close to the surface of the water while drifting, or moving with an
electric motor, let the line fall to the bottom as you slowly crawl
along, and I do mean slowly crawl. Try to maintain contact with the
bottom while you continue to move along the contour, or edge of the
structure, feeling for every object or obstruction on the bottom as you
go. You may get hung up occasionally, but these places are usually where
the fish are, and quite often as you release the line to unhook the
snag, you get bit. Be prepared for a hit any time you encounter this and
remember where it occurred. Throw another marker if necessary, but be
careful not to get tangled up with any of them as you slowly go through
the path you created.
  |

|
|
Work the edges, the ends and
all of the points of the structure, as well as any troughs that you may
find during this tube dragging presentation. Cover the area as thorough
as possible and don’t leave any stone untouched, if you know what I
mean.
The Spider Grubs can be fished
almost exactly the same, except with one small twist. I like to fish
them on a slightly heavier jig head and in a Rocker or Football style
jig. These can be bought at many larger stores, but are not always
available, so I pour my own and use better quality hooks when doing so.
I usually run ½ ounce, but occasionally go to ¾ ounce when the weather
dictates.
 
|
The spider grubs can be single
tail, but my preference is the double tail version in either Yamamoto or
XPS by Bass Pro Shops. The size comparison is different between the two,
so be careful if ordering. The Yamamoto Hula Grubs as they are referred
to, are smaller and a five-inch size is equivalent to the four-inch in
the XPS and other brand names. Rigged with tails to the sides, they will
imitate the crawfish perfectly when dragged across the lake bottom. With
this style of jig head, they also have less of a tendency to hang up
than the tubes, making them a little easier to fish. With two people
working together in the same boat, presenting both styles is
recommended. Sometimes you will find that one works better than the
other and change to monopolize on what the bass prefer on that
particular day. Try both types, but keep an open mind, be flexible and
be prepared to change back over if the bite slows again later.  
|
|
Once you become familiar with
this technique, you will find the average size fish significantly larger
than the ones you have caught before. Practice and time spent on the
water are the only ways to become confident with this method of fishing.
Be patient and remember that most bottom crustaceans are not competing
in a race down there. Just like the tortoise and the hare, slow and
steady is definitely better in the long run.  
|
|
There are several methods when
it comes to fishing these techniques, but just keep in mind one word,
“Slow”. If you think you are fishing slow enough, slow down some
more. Right around the time you are about to fall asleep, you’re just
about at the perfect speed. I like to refer to this method as,
“Watching Paint Dry”.
Give deep water smallmouth
fishing a try the next time you encounter a hot August day and think of
going back to the cottage for an afternoon siesta. Just because the
aggressive ones stop feeding, doesn’t mean it’s time to go in. Stay
out, do a little painting and wait for it to dry. I promise, you won’t
be disappointed if you just practice a little patience and apply these
methods.
Please practice CPR, (Catch
Photo and Release) whenever possible to ensure our future fishing!
|
An avid angler herself,
Mark's wife, Christiane,
holds up a deep water smallmouth.
|
|