Page 1 of 1

Fly Swap #3 - Favourite Bass Surface Fly

Posted: Tue Jan 29, 2008 9:18 pm
by Salar
Hi Everyone,

The theme for the third Fish-Hawk fly swap will be “Your Favourite Bass Surface Fly.” If you're interested in participating, send me PM with the pattern that you will be tying. Please try to limit the fly size so it's castable on a 6wt rod or less.

Fly swap FAQ

Signup Deadline: Signup Closed
Fly Submission Deadline: March 3rd

Participants:
  1. Salar

    Charlie Boy Hopper
    <img src="http://www.algonkinflyfishers.com/coppe ... Hopper.jpg" width="400" height="300">
    Hook: #6-10 Mustad 94840 (size #6 pictured)
    Thread: 6/0 Yellow
    Body: Yellow 2mm Foam
    Legs: Yellow Medium Round Rubber Legs, striped with red waterproof marker
    Wing: Olive Deer Body Hair
    Eyes: Colored with Black Sharpie Marker

    Notes from Salar
    -Use foam safe cyanoacrylate superglue (ie. Zap-A-Gap) for gluing the body
    -Use a sharp razor blade to trim the body to shape

    References:
    http://www.charliesflyboxinc.com/flybox ... arentID=16
    http://www.danica.com/flytier/ccraven/c ... yellow.htm
  2. Lew R.

    Fat Albert
    <img src="http://www.algonkinflyfishers.com/coppe ... Albert.jpg" width="400" height="300">
    Hook: #6-10, 4XL (size #8 pictured)
    Thread: 6/0 Black
    Over-body: Black 2mm Foam
    Middle-body: Black 2mm Foam
    Under-body: Black Thread over 2 pieces of Black 2mm Foam, coated with Sally Hansen Hard As Nails
    Indicator: Chartreuse 2mm Foam
    Wing: White Antron Yarn
    Front Legs: Black Medium Round Rubber Legs
    Rear Legs: Black Medium Round Rubber Legs, knotted

    References:
    http://www.orvis.com/detail.asp?subject ... 758&bhcp=1
    http://www.charliesflyboxinc.com/flybox ... rentID=138
  3. Jason S.

    Clouser Crippled Minnow ("Fire Tiger")
    <img src="http://www.algonkinflyfishers.com/coppe ... Minnow.jpg" width="400" height="300">
    Hook: #4 Mustad Signature Series R74
    Tail: Olive Marabou over Flashabou over Chartreuse Marabou
    Body: Bright Green Sparkle Yarn with Peacock Herl Shellback and Red Wool "Gills"
    Collar: Olive and Black Deer Hair, trimmed like a Dalhberg Diver
    Head: Chartreuse and Orange Deer Hair trimmed


    References:
    Recipe from "Clouser's Flies" and "Flyfishing for Smallmouth in Rivers and Streams"
  4. Todd B.

    Hell's Bay Hopper
    <img src="http://www.algonkinflyfishers.com/coppe ... Hopper.jpg" width="400" height="300">
    Hook: #2 Gamakatsu SC 15
    Thread: 6/0 White
    Tail: White Polar Fibre, barred with a gray marker
    Underbody: 4mm Rattle, secured with tying thread
    Body: White Estaz
    Legs (optional): White Medium Round Rubber Legs, barred with gray marker
    Floating Wing: White 2mm Foam, folder over and clipped to form the head
    Throat: Red Marker

    Notes from Todd B.:
    -For the swap the fly was tied on a Mustad 3366 #1.
    -Pearl Estaz was used in place of white.
    -The 4mm rattle seemed a little large for the pattern. I would recommend using a 3mm rattle instead.
  5. Beachburger

    Stealth Bomber
    <img src="http://www.algonkinflyfishers.com/coppe ... Bomber.jpg" width="400" height="300">
    Hook: #2 Mustad 34007
    Tail: 4 Strands of Silver Flashabou over Black Bucktail over White Bucktail
    Body: Black 2mm Foam
    Visual Enhancement: Chartruese Bucktail

    References:
    http://www.freeiq.com/stealthbomberfly
  6. uberfish

    Gartside Gurgler
    <img src="http://www.algonkinflyfishers.com/coppe ... urgler.jpg" width="400" height="300">
    Hook: #6-8
    Tail: White Bucktail
    Body: White 2mm Foam, cut to width of hook gap and length about twice shank length
    Hackle: Grizzly
    Throat: Red Hackle
  7. James R.

    Turk's Tarantula
    <img src="http://www.algonkinflyfishers.com/coppe ... antula.jpg" width="400" height="300">
    Hook: #2-14, 2XL (size #8 pictured)
    Thread: 3/0 Tan
    Tail: Golden Pheasant Tippet Fibers
    Rib: Small Copper Wire
    Body: Hare's Mask Dubbing
    Underwing: Pearl Krystal Flash
    Overwing: White Calf Tail
    Collar: Natural Deer Hair Tips
    Legs: Tan Barred Medium Round Rubber
    Head: Spun and Trimmed Natural Deer Hair
  8. northernfly

    Stimulated Madame X
    <img src="http://www.algonkinflyfishers.com/coppe ... adameX.jpg" width="400" height="300">
    Hook: #2-8, 2-3XL Nymph / Streamer (size #6 pictured)
    Thread: 3/0 White
    Tail: Elk Hair
    Body: Yellow Floss or Uni-Stretch
    Wing: Elk Hair
    Hackle: Grizzly, palmered over the head
    Legs: White Rubber
    Head: Orange Seal's Fur or Substitute

    References:
    Recipe by Sheldon Seale
  9. Woolly Bugger

    Hot Lips
    <img src="http://www.algonkinflyfishers.com/coppe ... otLips.jpg" width="400" height="300">
    Hook: #2/0-6 Bass Popper or Stinger
    Thread: 6/0 Yellow, 6/0 Black to tie in the foam
    Tail: Mix of Black and Chartreuse Krystal Flash, Black Poly Bear or Polypro Yarn, 3 pairs of Yellow Saddle Hackles (3 on each side)
    Body: Chartreuse Estaz or Cactus Chenille
    Back: Black 2mm Foam
    Throat: Brown or Yellow Hackle, tied throat or collar style
    Eyes: Large Yellow or White Rattle Eyes

    References:
    Pattern developed by Greg Webster (from Tying Warm Water Flies, C. Boyd Pfeiffer, page 79)
  10. Worm31

    Green Bomber
    <img src="http://www.algonkinflyfishers.com/coppe ... Bomber.jpg" width="400" height="300">
    Hook: #2-10 Mustad 36890
    Thread: 6/0 Black
    Tail: Calf Tail
    Body: Green Deer Hair, spun and clipped
    Wing: White Calf Tail, tied upright
    Hackle: Brown

Posted: Thu Jan 31, 2008 8:49 pm
by Salar
In record setting time we've filled all 10 spots for this swap. I guess it's a popular theme :). I'll send out the details about where to send the flies for the March 3rd deadline.

Thanks everyone for signing up.

Cheers,

Salar.

Posted: Mon Mar 10, 2008 10:26 pm
by Salar
All the flies have been received. The flies look great. The bass don't stand a chance this summer :D

I'll contact everyone to make arrangements for the pickup / delivery of the flies. In the meantime, check out the photos and recipes above.

Thank you everyone for participating in the swap.

Cheers,

Salar.

Posted: Tue Mar 11, 2008 5:10 am
by northernfly
Fine looking flies everyone.

Paul, thanks for organizing the swap and for the photos and recipes.

Can't wait to try them out.

northernfly

Posted: Tue Mar 11, 2008 8:22 am
by Todd B.
Mmmmmm...tasty fish food for sure! ;-)

Posted: Tue Mar 11, 2008 10:04 am
by worm31
Hey,

Great job guys, Thanks alot Salar for organizing the swap

P.s the green bomber is suppose to be a size 8 or 6 salmon hook but size 10 was the only size the i could get a hold of at the time

Posted: Tue Mar 11, 2008 3:20 pm
by Woolly Bugger
Paul,

Another great effort on your part for putting the swap together and posting all the photos and patterns. The flies look really great, I already have my 8wt strung up and I'm ready to go....unfortunately it's still 3 months to go :shock:

Cheers,

Woolly Bugger

Posted: Tue Mar 11, 2008 4:12 pm
by Todd B.
Stephan,

Who says you have to wait for 3 months. A few of the flies are big enough for pike and I know one is actually for big Browns but bass don't care. ;-)

Posted: Wed Mar 12, 2008 12:24 am
by Salar
I've been eyeing up a number of the flies for trout too :D

Posted: Thu Mar 13, 2008 3:33 pm
by Salar
Instructions for the Gartside Gurgler from uberfish:
  • Tie in tail material (bucktail about length of hook)
  • Bind down butts of tail about 2/3 of hook and snip at angle
  • Wind thread back to bend
  • Tie in grizzly hackle by tip
  • Coat body with CA glue
  • Lay foam strip over body (leave a space behind eye for tying off hackle)
  • Cup foam strip around shank and bind down with 2 or 3 wraps
  • Spiral thread forward and wrap down front edge of foam strip
  • Palmer the grizzly hackle along the thread indents, tie and trim excess
  • Tie in red hackle by tip, 2 or 3 wraps and tie off/trim
  • Fold foam over like shell back and tie off with 3 or 4 firm wraps
  • Whip finish head and trim foam to desired length of lip.