Revivifying Cork Handles

Just what the title says....anything and everything related to Rods, Reels, Terminal Tackle, Plastics, what others are using, what works, what doesn't work, and anything else you want to talk about regarding equipment.
User avatar
TheMaverick
Gold Participant
Gold Participant
Posts: 1219
Joined: Fri May 10, 2013 5:20 pm

Revivifying Cork Handles

Post by TheMaverick »

Since it's been asked lately, and because not all of us go out on the ice or watch videos of dancing girls in bikinis :lol: :lol: thought I'd share my latest project.

With triple A grade Portuguese cork being seemingly non existent nowadays, if not taking the EVA route, most companies will accept sub-par cork to be used as a rod component.
Unfortunately, the lower grade cork is somewhat pitted from the get go, and companies will fill in the gaps with wood filler.

After a seasons use, or two, handles tend to slowly lose that said filler, looking something like the picture below.

Image

Image


Some will appreciate the distressed and worn out look of the handle, I personally hate it, period!
After reading a few comments online, they recommended Elmers wood filler in "natural" color, so that's what I first purchased.
I proceeded in taping the extremities, and filled in the pitted areas with the filler.

Image

Image


I wasn't pleased with the end result on my first attempt, the tint was to light in contrast to the cork handle.

Image


After brushing off the previous filler, I went and purchased Lepage wood filler in "light oak".
After touching up all my rods, I let them dry for roughly 4 hours.
Sanded off the excess with a 600 grit sand paper.

Very happy with the end result this time around.
I will be sealing all of the handles with U40 cork sealer, it will prevent the pitting and keep them in pristine shape.

I do suggest a practice run on a smaller area before attempting to tackle the full handle.

Image

Image

Image

Image

P.s. works great on them Gar bitten handles! :lol: :lol: ;)
If fishin ain't your mission, then you can kiss my Bass!
User avatar
Supernova224
Bronze Participant
Bronze Participant
Posts: 122
Joined: Mon Aug 25, 2014 3:44 pm

Re: Revivifying Cork Handles

Post by Supernova224 »

Thanks for this post, very informative.

About the cork sealer, what kind of finish does it leave behind? I have some generic cork sealer/conditioner, but it seems to be very glossy.
User avatar
StarTzar
Silver Participant
Silver Participant
Posts: 972
Joined: Fri May 10, 2013 8:17 pm

Re: Revivifying Cork Handles

Post by StarTzar »

Supernova224 wrote:Thanks for this post, very informative.

About the cork sealer, what kind of finish does it leave behind? I have some generic cork sealer/conditioner, but it seems to be very glossy.
I use it on all my cork handles and here is my take on the finish.
If I had a Glossy Meter that read 1 to 10 with 10 being High gloss and 1 being mat, I would rate the finish at 3.
Velvet type finish. The cork does get darker but the protection you get is excellent.
Last edited by StarTzar on Fri Feb 05, 2016 7:45 am, edited 1 time in total.
BAA - 2016 Team 18 (10 shy of 28)
Renegade Bass - 2013 Team 67 - 2014 Team 28 - 2015 Team 51
BAA (Great organization) 2011 and 2012 Team 7
User avatar
TheMaverick
Gold Participant
Gold Participant
Posts: 1219
Joined: Fri May 10, 2013 5:20 pm

Re: Revivifying Cork Handles

Post by TheMaverick »

Supernova224 wrote:Thanks for this post, very informative.

About the cork sealer, what kind of finish does it leave behind? I have some generic cork sealer/conditioner, but it seems to be very glossy.
Originally, I only wanted to seal one rod, it does slightly harden the cork and leaves somewhat of a darker finish.

In the picture above, one is already sealed (it was sealed by the previous owner), and honestly, the margin in feel is minimal.
Hence, I’ll be sealing all of them.
It’s my understanding a very thin layer will suffice and adhere to the cork’s surface.
It will get glossy if you apply in excess.

Not only will it protect the cork, but for a tackle junkie that changes rods every other year, the re-sale value on a pristine looking rod is always better if I do decide to sell.

Also note, there’s filler for exterior applications, I used the one for interior.
If the cork is not sealed, I have a hard time believing they’ll stay as nice, as they presently are, when they come in contact with water.
If fishin ain't your mission, then you can kiss my Bass!
User avatar
zeke13
Bronze Participant
Bronze Participant
Posts: 143
Joined: Wed Jun 04, 2014 1:10 pm
Location: Ottawa

Re: Revivifying Cork Handles

Post by zeke13 »

Great post Mav and the rods look great .. I may give this a try just to pass some time.

Of course, reading your post brings me back to an SNL skit about cork .. but that's another story :shock:
User avatar
toobinator
Gold Participant
Gold Participant
Posts: 1354
Joined: Thu Nov 07, 2002 10:50 pm
Location: Winchester Ont.
Contact:

Re: Revivifying Cork Handles

Post by toobinator »

lol. I thought about the same skit.

Ed
Save a bass. Eat a chicken
Wallyboss
Diamond Participant
Diamond Participant
Posts: 4823
Joined: Tue Jun 29, 2004 7:44 pm
Location: Carlsbad Springs

Re: Revivifying Cork Handles

Post by Wallyboss »

I just wished I fished often enough to damage cork handles!!!!
When hell freezes over, I'll be there icefishing!!!

If you can't stand behind our troops,
Please feel free to stand in front of them!!!

Experience is that marvellous thing that enables you to recognize a mistake when you make it again
User avatar
TheMaverick
Gold Participant
Gold Participant
Posts: 1219
Joined: Fri May 10, 2013 5:20 pm

Re: Revivifying Cork Handles

Post by TheMaverick »

Just don't forget, cork soakers are born, not made! :lol: :lol:
If fishin ain't your mission, then you can kiss my Bass!
User avatar
StarTzar
Silver Participant
Silver Participant
Posts: 972
Joined: Fri May 10, 2013 8:17 pm

Re: Revivifying Cork Handles

Post by StarTzar »

Be careful now Boys .... or RJ will put a cork on it.
BAA - 2016 Team 18 (10 shy of 28)
Renegade Bass - 2013 Team 67 - 2014 Team 28 - 2015 Team 51
BAA (Great organization) 2011 and 2012 Team 7
User avatar
StarTzar
Silver Participant
Silver Participant
Posts: 972
Joined: Fri May 10, 2013 8:17 pm

Re: Revivifying Cork Handles

Post by StarTzar »

Wallyboss wrote:I just wished I fished often enough to damage cork handles!!!!
The damage to the handles are not caused by over-fishing.
It's due to the bashing against the boat deck when he losses a Bass.
BAA - 2016 Team 18 (10 shy of 28)
Renegade Bass - 2013 Team 67 - 2014 Team 28 - 2015 Team 51
BAA (Great organization) 2011 and 2012 Team 7
Wallyboss
Diamond Participant
Diamond Participant
Posts: 4823
Joined: Tue Jun 29, 2004 7:44 pm
Location: Carlsbad Springs

Re: Revivifying Cork Handles

Post by Wallyboss »

LOL!!!!!
When hell freezes over, I'll be there icefishing!!!

If you can't stand behind our troops,
Please feel free to stand in front of them!!!

Experience is that marvellous thing that enables you to recognize a mistake when you make it again
User avatar
biggs
Bronze Participant
Bronze Participant
Posts: 351
Joined: Mon Jan 26, 2009 9:23 pm

Re: Revivifying Cork Handles

Post by biggs »

Ed. You should really carry this U-40 cork sealer...just sayin' :wink:

Plus I need some.

....and great job Mav.
User avatar
StarTzar
Silver Participant
Silver Participant
Posts: 972
Joined: Fri May 10, 2013 8:17 pm

Re: Revivifying Cork Handles

Post by StarTzar »

biggs wrote:Ed. You should really carry this U-40 cork sealer...just sayin' :wink:

Plus I need some.

....and great job Mav.
X2
BAA - 2016 Team 18 (10 shy of 28)
Renegade Bass - 2013 Team 67 - 2014 Team 28 - 2015 Team 51
BAA (Great organization) 2011 and 2012 Team 7
User avatar
Butch420
Participant
Participant
Posts: 55
Joined: Wed May 15, 2013 7:24 pm

Re: Revivifying Cork Handles

Post by Butch420 »

X3 I just gave mine a bath last weekend and would give that stuff a try...
RJ
Site Admin
Site Admin
Posts: 8445
Joined: Sat Sep 13, 2003 9:18 pm
Location: Prospect, Ontario

Re: Revivifying Cork Handles

Post by RJ »

Great stuff, thanks for sharing the process. I do have one to take care of... :oops: :lol: Damn Gar!

RJ
Post Reply