little help. oil mix...johnson 30hp..1990

Anything and everything related to boating, motors, and electronic equipment. Find out the answers to your questions here.
Post Reply
User avatar
joco
Diamond Participant
Diamond Participant
Posts: 7649
Joined: Mon Dec 29, 2003 9:02 pm
Location: ottawa/hull

little help. oil mix...johnson 30hp..1990

Post by joco »

..man..ihave been fishing to long wit my big motor,,oil injected, :roll: .



little question.i got a 30hp johson........what is oil ratio.,,,,?

if i have a full 5 gallons gaz.........do i put all that small plastic oil contener in it..?

i just can remember. :? ..its been like 6 years since i mix oil..in biger motor like that.

but if i do recal,it was a little conterner in a 5 gallons off gaz...i think..? :roll:




joco.
User avatar
Swamp-Donkey
Bronze Participant
Bronze Participant
Posts: 136
Joined: Tue Aug 22, 2006 1:03 pm
Location: Kemptville, Ontario
Contact:

oil mixture

Post by Swamp-Donkey »

The mixture should be 50:1, 50 litres of gas to one litre of oil.
User avatar
crash
Silver Participant
Silver Participant
Posts: 840
Joined: Mon Feb 07, 2005 8:35 am
Location: hamilton/longpoint

Post by crash »

what year is the motor mite make a differance.

safest way I know to mix is in a 20 liter jerrycan
400 ml of oil for 20 liters of gas for 50 to 1
User avatar
troutnmuskiehunter
Diamond Participant
Diamond Participant
Posts: 3131
Joined: Wed Feb 28, 2007 11:30 am

Post by troutnmuskiehunter »

Here's a site that I use a lot when mixing different sized gas cans and oil/gas ratios for the outboard, chainsaw, etc.....

http://www.csgnetwork.com/oilfuelcalc.html
User avatar
joco
Diamond Participant
Diamond Participant
Posts: 7649
Joined: Mon Dec 29, 2003 9:02 pm
Location: ottawa/hull

Post by joco »

thanks guys

i did 50/1.

now lets try that motor... :roll: ..been a cople off years none working i think.. :?
User avatar
OTRA
Bronze Participant
Bronze Participant
Posts: 124
Joined: Fri Jan 12, 2007 8:10 am
Location: Warrenton, VA

Post by OTRA »

Since I suffer from CRS (Can't Remember Stuff); I've started labeling the different gas cans using duct tape. I list the ratio and which chainsaw, weedeater etc. Now if I can only remember where I put my pen ....
Wallyboss
Diamond Participant
Diamond Participant
Posts: 4823
Joined: Tue Jun 29, 2004 7:44 pm
Location: Carlsbad Springs

Post by Wallyboss »

Joco johnsons 2 stroke motors 3 years ago were 100 to 1 ratio I almost bought one but I liked the Merc better.

Send Micropterus(??spelling) a pm he'll know for sure.
User avatar
mikemicropterus
Bronze Participant
Bronze Participant
Posts: 411
Joined: Thu Jan 12, 2006 10:33 am
Location: Franktown
Contact:

50/1

Post by mikemicropterus »

It really doesn't matter the make of motor but most are 50/1 and at that ratio the motor will last more than 20 years. At 100/1 like yamaha recommmends for their engines the live will be half that. But they smoke less BIG DEAL they last longer. :lol:
User avatar
CrappieKeith
Bronze Participant
Bronze Participant
Posts: 150
Joined: Wed Apr 04, 2007 4:46 pm
Location: Palisade,Mn.

Re: 50/1

Post by CrappieKeith »

mikemicropterus wrote:It really doesn't matter the make of motor but most are 50/1 and at that ratio the motor will last more than 20 years. At 100/1 like yamaha recommmends for their engines the live will be half that. But they smoke less BIG DEAL they last longer. :lol:
Error on the side of caution.You may go through a plug or 2 ,but to burn a motor up is a bad deal.Go heavy on the oil.
Post Reply