Page 1 of 1

Planner board help

Posted: Sat Jul 11, 2015 6:11 pm
by Stan
Bought a planner board this winter and installed a tattle flag. Works great but the board runs 45 degrees away from the boat. Checked on line and I think it should be running at 90 degrees from the boat.

How do I fix it?

Re: Planner board help

Posted: Sat Jul 11, 2015 8:46 pm
by MLR
What speed are you going and how much line out between the boat and board and what size of lure?

Re: Planner board help

Posted: Sun Jul 12, 2015 5:45 am
by Stan
Running crank baits with 80 ft of line at 2.2kph

Re: Planner board help

Posted: Sun Jul 12, 2015 8:19 am
by MLR
Have you tried going a little faster? I pull mine a 2 mph

I have never seen a planner board run at 90 degrees to the boat , only somewhere between 45 and 70.

Also found you need to tune the crank bait fastener eye to ensure it is pulling straight. It makes a huge difference in the performance and action of the lure. If it is causing the lure to steer to the inside, it will prevent the planner board from getting as far out , but not by much.

Try just tying the planner board on with no lure and verify if the problem is with the lure or the board

Re: Planner board help

Posted: Sun Jul 12, 2015 8:43 am
by BC FD
Are your boards home made or manufactured. Possibly if home made your eye bolt with your connection may be to far back.
Mitch

Re: Planner board help

Posted: Mon Jul 13, 2015 6:40 pm
by Stan
Boards were bought. I had checked on YouTube and one of the videos had the board running at 90 degrees.

Sounds like 45 is the right number.