
time to build ice shack!(pics has started)
- SCUBA_STEVE
- Silver Participant
- Posts: 771
- Joined: Mon Jun 06, 2005 9:04 pm
- Location: ottawa
- Contact:
- bucketmouth
- Gold Participant
- Posts: 1685
- Joined: Tue Sep 07, 2004 4:26 pm
- Location: Russell
- Contact:
Thanks for the offer on the HD foam Don
. Do you have it on your shack, and does it get the cold out of the floor? If you ever decide to part with the stove, let me know. I'll stop by next Sun. if your working on your hut and see if we can figure out a solution to those runner's
. What's this about a chalet
Should be going at it again this upcomming week end. Managed to pop a couple of windows in it and get the door cut out before taking it apart on Sun.
Starting to look like something.


Rob



Should be going at it again this upcomming week end. Managed to pop a couple of windows in it and get the door cut out before taking it apart on Sun.
Starting to look like something.


Rob
- SCUBA_STEVE
- Silver Participant
- Posts: 771
- Joined: Mon Jun 06, 2005 9:04 pm
- Location: ottawa
- Contact:
- bucketmouth
- Gold Participant
- Posts: 1685
- Joined: Tue Sep 07, 2004 4:26 pm
- Location: Russell
- Contact:
Rob, there is enough to do your floor no prob. We don't have it under our floor currently as we didn't build this shack, we picked it up for a song from Oziles. I did have it under that 4X8 shack I had 3 years back (when I first met ya down at Petrie). It makes quite a difference if your floor is only 1/2" OSB. Not sure but you likely used ply for your floor but the offer is there either way bud.
Let me know, wifey wants it out of the garage
Don
Let me know, wifey wants it out of the garage


Don
- SCUBA_STEVE
- Silver Participant
- Posts: 771
- Joined: Mon Jun 06, 2005 9:04 pm
- Location: ottawa
- Contact: