Musky Leaders

This is where it's all going on. One can ask for advice or general information or simply chew the fat about fishing tackle, tips, and locations.
Post Reply
User avatar
Buckshot
Participant
Participant
Posts: 85
Joined: Sat Jan 17, 2009 11:15 pm
Location: Ontario

Musky Leaders

Post by Buckshot »

Folks,

With the end of the hardwater season coming I am getting ready for the soft water season, while Musky season is still a long way off I am a new Musky hunter and I am starting to get things in order.

I am interested in tying my own leaders for a few reasons, its nice to make your own products and the price of commercialy made ones seems crazy and you never seem to get just what you want from a manufacturer.

I am looking at tying some flourocarbon leaders in 80lb test.

Just wondering if anyone can offer some advice.

Thanks in advance
User avatar
fishermccann
Participant
Participant
Posts: 33
Joined: Mon Mar 31, 2008 1:48 pm
Location: Pickering / Cameron Lake

Post by fishermccann »

Yes, don't do it, Mono leaders for Musky , I would not!
User avatar
Lonnie
Bronze Participant
Bronze Participant
Posts: 119
Joined: Mon Nov 26, 2007 12:29 pm
Location: Ottawa

Post by Lonnie »

80 lb flouro is fine - 120 lb for extra insurance - for 120 lb I suggest you buy them, hard to tie without a machine - Stringease.com is a good place. In either case just be sure to check it after every fish and replace it if you see signs of wear.
cheers,
LK
User avatar
Buckshot
Participant
Participant
Posts: 85
Joined: Sat Jan 17, 2009 11:15 pm
Location: Ontario

Post by Buckshot »

Thanks Lonnie
User avatar
Big Jim
Silver Participant
Silver Participant
Posts: 610
Joined: Wed Jul 27, 2005 5:19 pm
Location: SEELEY'S BAY, ONTARIO
Contact:

mono/flouro leaders

Post by Big Jim »

Buckshot, never been bitten of yet with well watched 100lb, but 120 is just a wee bit safer I bet...Stringease stuff is awesome.

Used to make my own, but Bernards stuff is really the way to go!!! :D

I know lots of guys that have made their own........and.....had them come apart...not good :( :cry: :x and they are always the biggest ones that it seems to happen with.

Good Luck

BIG JIM
User avatar
Relic
Silver Participant
Silver Participant
Posts: 655
Joined: Thu Sep 16, 2004 7:10 pm
Location: Ottawa via "the Prior"

Post by Relic »

Flouro 100 Pound minimum.....it's near invisible so why go lighter??? It is not tooth proof, heavier the better.

Go to the Carp Show. Swing by JB's booth and grab some American Fishing wire single strand leader material 175lb to 300 lb, some Flouro, Stringease snaps and some heavy swivels.

Your all set, for what ever situation and technique you might come across.
User avatar
TrollingThunder
Participant
Participant
Posts: 77
Joined: Thu Mar 13, 2008 10:06 pm

Post by TrollingThunder »

I got into making my own leaders last season, although I wanted to go heavier (and plan on doing so this year), I used 80 lb Seaguar and used crimps vs. the tieing (was a pain to get consistent knots with such thick line). Never had one break all season, however, their durrability was suspect after a hard days casting...I would definately consider going heavier due to the fact that 80 lb is easily cut when a big girl gets her teeth on it.
User avatar
rodbreaker
Bronze Participant
Bronze Participant
Posts: 174
Joined: Thu Aug 07, 2008 6:13 pm
Location: Ottawa

Post by rodbreaker »

Contact Chris here,great price and local.
http://riverratlures.com/
Dirty....mean....mighty unclean.
Post Reply