Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
This is where it's all going on. One can ask for advice or general information or simply chew the fat about fishing tackle, tips, and locations.
OBD
Gold Participant
Posts: 1293 Joined: Mon Jul 17, 2006 4:29 pm
Post
by OBD » Thu Mar 01, 2007 5:42 pm
Hi all
Planning on buying a small 9.9 evinrude in the 1980's, its been tuned up, winterized and really well maintained by the shop. Anyone have bad/good experiences with them?
Thanks in advance,
Nodie
joco
Diamond Participant
Posts: 7652 Joined: Mon Dec 29, 2003 9:02 pm
Location: ottawa/hull
Post
by joco » Thu Mar 01, 2007 6:10 pm
hi nodie.
i got a 6hp evinrude 1976.........and its my best motor..smooth and very reliable.
father got a 15 and a 20 hp in the 80,s very reliable.
if its in good shape and been take care..it should be a charm.
but hey you never no.used is used.....
good luck on your purchase..if you do go for it.
joco
Coyote
Silver Participant
Posts: 550 Joined: Thu Mar 10, 2005 6:26 pm
Location: Orleans,Ontario
Post
by Coyote » Thu Mar 01, 2007 6:11 pm
I have a 15hp, mid 80's and it works great starts 2 pull. Now watch something happen to it
slop
Gold Participant
Posts: 1649 Joined: Sat Jan 03, 2004 1:36 pm
Location: Fisheries Management Zone 18
Post
by slop » Thu Mar 01, 2007 6:28 pm
Nodie, this sounds like it could be a good deal and if it is, i would proceed. Growing up in the 70's -80's those engines were the best hands down(or atleast i thought they were
) You still see lotsa them around so that may tell ya something
Let us know if your gonna be a proud papa!
OBD
Gold Participant
Posts: 1293 Joined: Mon Jul 17, 2006 4:29 pm
Post
by OBD » Thu Mar 01, 2007 6:36 pm
Thanks for the advice guys, the motor comes with a warranty for a month, should be fine! Now just need the lily pads
joco
Diamond Participant
Posts: 7652 Joined: Mon Dec 29, 2003 9:02 pm
Location: ottawa/hull
Post
by joco » Thu Mar 01, 2007 6:38 pm
hi nodie.
i hope your warranty dont start today.......
.
hope it will be one month in open water time..
OBD
Gold Participant
Posts: 1293 Joined: Mon Jul 17, 2006 4:29 pm
Post
by OBD » Thu Mar 01, 2007 6:44 pm
Of course joco
Going to see it saturday and will put a down payment till may! Can't wait
Just need to find a small trolling motor now
Nod
joco
Diamond Participant
Posts: 7652 Joined: Mon Dec 29, 2003 9:02 pm
Location: ottawa/hull
Post
by joco » Thu Mar 01, 2007 6:50 pm
Good.
that 9/9 might be small anaught to troll....
mabe a little electric motor for some croosing around even slower..
.
joco
OBD
Gold Participant
Posts: 1293 Joined: Mon Jul 17, 2006 4:29 pm
Post
by OBD » Thu Mar 01, 2007 6:52 pm
Yeah looking around to see if I can find a small minn kota or something
Scumking
Silver Participant
Posts: 631 Joined: Mon Oct 25, 2004 10:27 am
Location: St Bruno,QC
Post
by Scumking » Fri Mar 02, 2007 7:42 pm
Nodie, I had my 81 Johnson,samething for 23 years.Took good care of it and it was ausome
.Great Motors
Ron
Bruin
Bronze Participant
Posts: 465 Joined: Tue Dec 07, 2004 1:03 am
Location: Sault Ste Marie
Post
by Bruin » Fri Mar 02, 2007 11:41 pm