Page 1 of 2

Hook sharpening

Posted: Fri May 04, 2007 6:01 am
by Mr.J.
I have been hearing over and over the preaching about keeping the hooks sharp.

I think it's time to take this advice to heart.

What do you guys use to sharpen your hooks with? Is on tool really better than another?

Posted: Fri May 04, 2007 7:06 am
by troutnmuskiehunter
I use a Rapala sharpener....it has a retractable fine grit aluminum oxide stone that slides back into a plastic case...

I always sharpen my hooks Mr J...trout have very bony mouths so I normally touch up my fly hooks after ever catch..

Posted: Fri May 04, 2007 7:54 am
by getnjiggywithit
The one that I use looks like a pen but folds into a half pen looking thing. Ive had it for years and it works great and cost me about $8 :D

Posted: Fri May 04, 2007 9:06 am
by OTRA
Hooks like one's wit should always be sharp. :)

Posted: Fri May 04, 2007 10:18 am
by weedman
I also use the retractable Rapala sharpner. (I think its about $7) I would think anyone of them is fine to use. Sharp hooks mean more boated fish.
weedman

Posted: Fri May 04, 2007 8:59 pm
by muskymatt
Hey J

I have used one like this one and I have to say they get just about as sharp as it can get....

Image

These are even better IMO With the right pressure and angle they are awesomely sharp


Image

But a small flat file is pretty good to.

I have a rapala file that has two chainsaw files together with a solid other side with diamond grit, nice handle , it works good.....10$.

Lots to pick from, so try out a few first.

Matt

Posted: Fri May 04, 2007 10:02 pm
by Fish'n Buddy
muskie matt,
that rapala file you have, I have the same thing and not sure if I'm using it properly...I guess it's kinda hard to explain through typing, but the way i figure it is supposed to be done is running the point down the groove, against the grain...it seems to sharpen it ok, but I just want to be sure there isin't something I should be doing different
Thanks
WW

Hook Sharpening

Posted: Sun May 06, 2007 6:58 pm
by Cyber
I picked up a nifty little tool at the Carp Fishing Show called a "Speedy Sharp". I'm not sure where to get them on the open market, but surely one of our "Retail Partners" would have one or knowledge of where to get one. :wink: :wink:

I think the biggest problem of most folks, (I know I was guilty!! :oops: ), is understanding the difference between "sharpening", and "honing". My "Speedy Sharp" came with an instruction sheet and it's quite easy to see how the two techniques differ and how "honing" will add to the longevity of any sharp edge.

I don't know, they may have a Website, but if not their address is Speedy Sharp, 1410 East Pine Ave., Meridian, Idaho, 83642 U.S.A.

Hope this helps someone!! :) :) Cyber Out :wink: :wink:

Posted: Sun May 06, 2007 9:45 pm
by Musky51
talk to Ken at the meeting on Wednesday

Re: Hook Sharpening

Posted: Sun May 06, 2007 10:09 pm
by Bobber
I picked one up as well myself and all I can say is WOW. These little gems do a fantastic job, not just on hooks, but on every blade I own. I came home after the show and sharpened everying I could possibly find to sharpen......even my trolling motor blade. Cuts through anything now. 8)

I believe I still have a card. Let me check and see if I can get some more information on them.
Cyber wrote:I picked up a nifty little tool at the Carp Fishing Show called a "Speedy Sharp". I'm not sure where to get them on the open market, but surely one of our "Retail Partners" would have one or knowledge of where to get one. :wink: :wink:

I think the biggest problem of most folks, (I know I was guilty!! :oops: ), is understanding the difference between "sharpening", and "honing". My "Speedy Sharp" came with an instruction sheet and it's quite easy to see how the two techniques differ and how "honing" will add to the longevity of any sharp edge.

I don't know, they may have a Website, but if not their address is Speedy Sharp, 1410 East Pine Ave., Meridian, Idaho, 83642 U.S.A.

Hope this helps someone!! :) :) Cyber Out :wink: :wink:

Posted: Mon May 07, 2007 6:59 am
by Crunchy
Speedy Sharp.....

Get them at the fishing counter in the fishing section at Crappie Tire.
$17.99

They even have a little TV to see a demo on.

Posted: Mon May 07, 2007 2:44 pm
by Bobber
Hello all,

I love these things so much I'm in the process of establishing a partnership with Speedy Sharp right here on Fish-Hawk. Gord Mallin is the gentleman I met at the Carp show and is a great guy to converse with, as many of you may have noticed if you saw his presentation.

Gord can be reached at info@speedysharpcanada.com or by phone at 819-763-7427 or fax at 819-762-2481.

You can see more information on Speedy Sharp by checking out their website. http://www.speedysharpcanada.com

<img align="right" src="http://www.fish-hawk.net/photogallery/a ... rp.gif">As mentioned by Mike (I replaced his post with this one, sorry Mike), the Speedy Sharp is available in many of the Canadian Canadian Tire stores in Ont.
- Ottawa
- Orleans
- Brockville
- Trenton
- Barrie
- Cobourg
- Sault St-Marie
- Sudbury
- Aurora
- Fergus
- St-Maries
- Port Perry
- Espenola
- Oshawa
- Markham
- Delhi
- St-Thomas
- Perrysound
- Niagara Falls
- Pickering
- and in some 90 stores in Quebec including Gatineau, Hull, Buckingham, and Aylmer.

They are also available at...
- Home Hardwarw in Cornwall Ont.
- Rona in Gatineau and Hull,Qc.
- @ HOME (400 Earl Grey Dr.) Kanata.
- Bennet's bait'n Tackle, Smithfalls Ont.
- Norris Live Bait & Tackle, Wesport, Ont.
- Sport Action Ottawa, Ont.
- And other stores across Canada.

Or you can order them on-line at the website above.

I look forward to establishing a partnership with Speedy Sharp and putting one of these in the hands of anglers everywhere. They're a great tool and a great addition to your tackle box.

Cheers,

Posted: Mon May 07, 2007 3:01 pm
by troutnmuskiehunter
Free for Fish-Hawk members??....atta boy Bobber!

Posted: Tue May 08, 2007 6:52 am
by Kpin
Reasonable cost and sounds very effective from our anglers testimonies. I've always used a sharpening stone but after reading this thread I'm feeling awkward after Cybers post wondering if I've been actually sharpening or "honing", will have to research that as I'm unsure but am pretty well assured it's not as effective as sharpening.

Thanks for adding more confusion to my already confused world J. I shall begin planning revenge. :x :lol:

Posted: Tue May 08, 2007 7:05 am
by troutnmuskiehunter
Kpin...Honing means maintaining your blade. It helps put your blade back into alignment to give you the best performance possible until such time as your knife needs sharpening.
Sharpening actually shaves metal off of the blade to put a fresh edge on the knife. If you hone regularly, you cut down on the need for sharpening, which extends the life of your knife.

I have used the Speedy Sharp for all my knives but not fish hooks.. it does an excellent sharpening job and you can actually see the bits of steel removed from your knife. Speedy Sharp has two functions....honing and sharpening.