Gordo/RJ's Ice Hut Project.....(Updated Dec. 11th)

This is where it's all going on. One can ask for advice or general information or simply chew the fat about fishing tackle, tips, and locations.
Post Reply
RJ
Site Admin
Site Admin
Posts: 8445
Joined: Sat Sep 13, 2003 9:18 pm
Location: Prospect, Ontario

Gordo/RJ's Ice Hut Project.....(Updated Dec. 11th)

Post by RJ »

Well now that the site seems to be usable now....I figured I'd post this.... :P


Well we caved......Gordo and I decided to build ourselves an ice hut!

We picked up the lumber, nails and screws Friday night.....$270 at Home Depot....

Image

I drew up plans...Gordo looked them over and away we went...

Image

Framing began....

Image

Emmerson helped out.....well about as much as Sinker... :lol:

Image

Image

The floor was made first.....then started on the back piece....

Image

The Back piece....a hole will be cut later for the wood stove piping...

Image

Emmerson gave up on his task... :lol:

Image

Next up was the runners for underneath....we decided to go with two......so we can clear out the area around the drilled holes to keep it fairly clear.....

Image

Finished floor with runners...

Image

Next up was cutting our holes.....this is when it started to look like an ice hut!... :lol:

Image

We decided on 4 corner holes.....which gives you roughly 6 1/2 feet apart for your baits....

Image

Now.....on goes the back piece and sides.....

Image

Gordo is trying out the basement here...

Image

Emmerson tries out the floor.....

Image

Putting up the last side wall...

Image


We finished the front door panel as well......by the lights of Gordo's van....so no pics were taken of that.....

Still to do......door....roof....windows....and paint.....

We are going with a slanted roof to keep snow off.....

Eye-Level windows......

Painted Red and Black...Sens flag will be flyin!

I'll update this as progress continues..... :P

We did great today.....in about 6 hours we got the floor built and all the sides up....a nail gun is a god send!

No injuries and arguments either.... :lol:

RJ
Last edited by RJ on Sun Dec 11, 2005 6:43 pm, edited 4 times in total.
Top
User avatar
bucketmouth
Gold Participant
Gold Participant
Posts: 1685
Joined: Tue Sep 07, 2004 4:26 pm
Location: Russell
Contact:
Contact bucketmouth

Post by bucketmouth »

It's looking good bud! And it'll look kick-butt with that Sens paint scheme.
One word of advice, with your runners that high off the ice you'll want to put a skirt around it to stop drafts. Or bank it with snow if you're gonna just plop it and fish in one spot the whole winter... they tend to freeze in if you're not always on top of it. I usually block my runners up off the ice an additional 1/2" on either end so they're not sitting on the ice the whole length of the runner (I use a little piece of plywood to do this).

Can't wait to get out there and join you guys :D Come on ice!

bucket
Top
User avatar
wolfe
Diamond Participant
Diamond Participant
Posts: 7588
Joined: Sat Feb 14, 2004 11:04 am
Location: Marietta, NY & Wolfe Lake, Ont.

Post by wolfe »

Seems we have a lot of Hawk Talkers with "projects" lately!

Looks good, guys...actually, it looks pretty big!

Can't wait to see it painted and done. Post pics when it is.

Will you name your shack?

W.

PS: cute pics of the two young ones, 2-legged & 4! :wink:
Thanks, Dad, for taking me fishing when I was a kid.
Top
User avatar
bucketmouth
Gold Participant
Gold Participant
Posts: 1685
Joined: Tue Sep 07, 2004 4:26 pm
Location: Russell
Contact:
Contact bucketmouth

Post by bucketmouth »

You should call it the PBL...

bucket
Top
User avatar
Wall-I-Guy
Diamond Participant
Diamond Participant
Posts: 4930
Joined: Tue Nov 18, 2003 2:06 am
Location: Kanata,Ontario

Post by Wall-I-Guy »

ARGH ARgh Argh :!: (in the voice of Tim the toolman :D ).....More power :!:

Sorry, everytime I see a compressor, I get carried away :!: :lol:

Looks great boys :!:

One suggestion maybe, since it looks rather spacious. Perhaps you should have a removable hatch in the centre for a couple holes..for visitors on those cold days :!: :wink: :D
Top
User avatar
fishforfun
Gold Participant
Gold Participant
Posts: 1408
Joined: Sun Apr 11, 2004 2:45 pm
Location: Georgetown Ont.

Post by fishforfun »

How big is that hut? Looks like you could play cards and fish :wink:
Top
User avatar
baz fish
Diamond Participant
Diamond Participant
Posts: 2251
Joined: Mon Jan 26, 2004 7:26 pm
Location: Moose Creek

Post by baz fish »

Looks like a nice hut RJ and Gordo and keep posting the picks of your shack till its all done.
Top
User avatar
M.T. Livewell
Diamond Participant
Diamond Participant
Posts: 2891
Joined: Mon Mar 03, 2003 3:05 pm
Location: Rockland

Post by M.T. Livewell »

I say hook Sinker up to it and use it as a dog sled.
Ask Fishforfun, he'll tell you how much fun it is to ride inside one of those things at high speeds. :lol:

Look great boys. Make sure the windows are at eye-level when you are sitting so you can look outside and watch your lines.

M.T. Livewell
Top
User avatar
Mike Lennox
Silver Participant
Silver Participant
Posts: 625
Joined: Tue May 10, 2005 7:09 pm
Location: ottawa
Contact:
Contact Mike Lennox

Post by Mike Lennox »

nice hut RJ/Gordo!!

Keep the pics coming...and I hope you have some good times and good fish there this winter :D


mike
Top
User avatar
iankrzyzanowski
Gold Participant
Gold Participant
Posts: 1223
Joined: Mon Jan 27, 2003 12:22 pm
Location: Metcalfe, Ontario

Post by iankrzyzanowski »

Looks like you lads new what you were doing!
Awsome boys, cant wait to see the final hut!
Top
User avatar
Kpin
Gold Participant
Gold Participant
Posts: 1325
Joined: Thu Apr 14, 2005 10:08 pm
Location: Da Great White North...Eh!

Post by Kpin »

Looking good gents! Can't wait to see the final unveiling.
Top
RJ
Site Admin
Site Admin
Posts: 8445
Joined: Sat Sep 13, 2003 9:18 pm
Location: Prospect, Ontario

Post by RJ »

Bucket...I hear ya on the draft....we have some left over board to lean up against it....to prevent draft... :wink:

FFF....she's 8X8.... :P

I was tellin Birdee last night we could take our Coleman bed out with us and spend the night...boy did I ever get this... :roll: :roll: :roll: :roll: :roll: :lol:

RJ
Top
User avatar
Gord
Retail Advertiser
Retail Advertiser
Posts: 3076
Joined: Sat Jan 24, 2004 2:07 pm
Location: Merrickville

Post by Gord »

Lookin' good lads!! Can't wait to see the finished product! I like the idea of the Sens colour scheme!! :D :)
I'm a goin' fishin', mama's goin' fishin' and my baby's goin fishin' too.

.......Taj Mahal.... "Fishin' Blues"
Top
User avatar
franklauzon
Bronze Participant
Bronze Participant
Posts: 394
Joined: Tue Dec 30, 2003 1:32 pm
Location: Hammond, ON, Canada

Runners

Post by franklauzon »

Since you only have two runners, you might have an issue with it trying to tip. You may need to block off the sides so that if you get a lot of people on one side, and no one on the other, it doesn't want to tip. Just something to test.
Top
User avatar
dh99
Bronze Participant
Bronze Participant
Posts: 258
Joined: Tue Jun 28, 2005 9:33 am
Location: Sherbrooke,QC

Post by dh99 »

Looks really good guys. Wish I had one of those.

One tip, if your runners are made out of 2x10 or2x12 you might want to double them up. When I was a teenager, our hut had skis that were 2x12 and they didn't last, we doubled them up and it made a big difference and it help to keep the hut floating over the snow when pulling it. The single 2x12 would just dig into the snow.

Can't wait to see the final product.

DH
Top
Post Reply

Return to “Fishing Talk”